renewableenergyforbusinesses

Market-Wide Half-Hourly Settlement: What MHHS Means for Your Business

Updated 23 October 2026 · Renewable Energy for Businesses

Want to cut what your site uses and pays for energy?

Request a quote

What is market-wide half-hourly settlement?

Settlement is the back-office process that reconciles what each supplier bought for a half-hour with what its customers used. Most customers do not have a meter that can record half-hourly consumption, so use has been estimated from the average customer's pattern. Elexon, which runs settlement, says the reform lets it use actual consumption in each half-hour instead of estimates or monthly readings.

It is a supplier-side reform: Ofgem appointed Elexon in 2021 to lead delivery, and the work involves more than 250 market participants. Ofgem's decision covers import and export MPANs, so a site with export metering is inside it too. The wider plan for measuring and cutting a site's demand is on the energy management page; this guide covers only what the settlement change means for a buyer.

Larger sites are not new to half-hourly settlement. Ofgem's guide says that from 1 April 2017 every business in profile classes 5 to 8 has been required to have its energy use recorded every half-hour.

When does MHHS happen?

Suppliers started moving meters on 22 October 2025. The programme's dates for the rest:

MilestoneDateWhat it means
M1122 October 2025Migration starts for unmetered supplies and advanced metering systems
M1222 October 2025Migration starts for smart and non-smart meters
M1428 October 2026Every supplier must be able to take on MPANs under the new model. From here an MPAN cannot be moved back to the old regime when the customer changes supplier
M157 May 2027Full transition complete: the end of meter migrations
M162 July 2027Cut-over from the 14-month settlement timetable to a four-month one

Two cautions for older articles. The dates have moved: Ofgem's 2021 decision set a transition completing in October 2025, while the programme now shows migrations ending on 7 May 2027. And May 2027 is the end of migrations, not of the programme: the shorter timetable starts on 2 July 2027, and Elexon will run the old and new regimes side by side until July 2027.

On progress, the programme's steering group has confirmed that the M14 criteria are on track to be met. Elexon's dashboard article of 20 March 2026 counted 5.8 million metering systems on the new arrangements and 28.1 million still on legacy ones.

Which meters move, and is a half-hourly meter a smart meter?

All of them. M11 covers unmetered supplies and advanced metering systems, which Elexon says are normally used by larger non-domestic consumers. M12 covers smart and non-smart meters.

The terms overlap but are not the same. GOV.UK describes two kinds of non-domestic smart meter: advanced (AMR) meters, which at a minimum provide usage data, and SMETS meters, which also provide tariff information. Ofgem says suppliers have a licence obligation to supply larger customers in profile classes 5 to 8 through an advanced meter, and GOV.UK puts profile classes 1 to 4 under the smart metering mandate. Ofgem's guide says a first two-digit number of 05 to 08 on the supply number marks a class 5 to 8 site; the MPAN guide shows where it sits.

The pages checked do not explain how a traditional meter's use is spread across the half-hours, so a site on a non-smart meter should ask its supplier.

Is MHHS mandatory, and should I opt in?

There is nothing to opt into. All suppliers must have migrated all MPANs by M15, and after M14 an MPAN cannot revert to the old regime on a change of supplier. The programme's pages are written for suppliers and other participants, and none gives a customer action list.

What a business controls sits around the edges:

  • The meter. A microbusiness in the smart metering mandate must be offered a SMETS meter. For larger sites the supplier decides what to offer.
  • The contract. GOV.UK says suppliers must start telling non-domestic customers about the policy from 1 January 2027, and from 1 September 2027 new fixed-term contracts must include a term saying the customer has, or agrees to have, smart or advanced meters.
  • The data. Elexon says the Retail Energy Code Company is developing consent controls so consumers can grant and manage consent to share their energy data.

Will my bill change, and is a half-hourly meter dearer?

Ofgem's aim is that MHHS gives suppliers the incentive to offer new tariffs such as time-of-use. That changes what a supplier may offer, not what an existing contract charges. The Elexon and Ofgem pages checked do not say rates change because a meter migrates, so the contract still sets the price.

The earlier move for larger sites is the nearest evidence. Ofgem's 2021 guide says many businesses saw no change or a fall in their bills. Some paid more because suppliers had extra work collecting and processing half-hourly readings, and CT-metered sites could pay more in network charges because they faced a charge for reserved capacity. That was profile classes 5 to 8, so treat it as a prompt to check, not a forecast.

Ofgem's suggestions for those businesses carry over:

  1. Compare at renewal, asking for time-of-use offers as well as flat rates.
  2. Look at the agents. Suppliers appoint agents for reading, data collection and meter upkeep. Ofgem says you can appoint your own and suggests ones qualified for half-hourly work.
  3. Check reserved capacity if the site has a CT meter, and ask the network operator if the charge looks too high.

No official source checked gives a standard price for a half-hourly meter, so ask for the metering and data-collection lines to be itemised in any quote. The price per kWh guide explains the rest of the bill.

What does MHHS change for batteries, solar, load shifting and EV charging?

The settlement change saves nothing on its own. It lets a supplier see, and potentially price, the half-hour in which energy is used, and whether that reaches a site depends on the contract.

DecisionWhy half-hourly settlement mattersCheck before acting
BatteryOfgem lists battery storage among the innovations the new incentives are meant to encourageWhether your contract passes time-varying prices through. The battery savings guide covers network charges
Solar self-consumptionSelf-consumption depends on when the site uses power, which only interval data showsTwelve months of your own half-hourly use against the expected generation profile
Load shiftingOfgem lists time-of-use tariffs and automation among the offers it expectsWhich processes can move without hurting output. See demand-side response
EV chargingOfgem lists vehicle-to-grid among the innovations it expects, and a half-hourly profile shows headroom between demand and supply capacityMonitoring data first; the connection process is separate

Size equipment from your own data, not from a promise of future tariffs.

What should a business do before the migration ends?

  1. Identify the meter from a bill and ask the supplier whether it is advanced, SMETS or traditional, and when the supply point is due to migrate.
  2. Ask for the data. GOV.UK says non-domestic customers and their nominated third parties can request up to 12 months of historic smart or advanced meter data from the supplier. Suppliers must also make user-accessible energy use information available to smaller non-domestic customers with such meters.
  3. Read the contract for time-varying rates and the smart-meter term due from 1 September 2027.
  4. Use the data first. Baseload, peaks and daytime shape decide solar, storage and charger sizing, and the monitoring guide covers what to measure.

Readers who want a site-specific view of demand, tariffs and meters can send an enquiry through the form on the energy management page.

Sources and last checked

Checked on 22 October 2026. Programme dates can be re-planned, so the MHHS Programme and Elexon pages are the authority if they disagree with this one.

Guides on this topic

Common questions

Is a half-hourly meter the same as a smart meter?

Not exactly. GOV.UK describes advanced (AMR) meters and SMETS smart meters as two types in the non-domestic market. Advanced meters give usage data at a minimum, and SMETS meters also give tariff information. Both can feed half-hourly readings to the supplier.

Does MHHS apply to a site that only exports power?

Yes. Ofgem's April 2021 decision covers import-related and export-related MPANs, so export metering points migrate as well. A site with generation should ask its supplier or export buyer how that supply point is being handled.

What if my supplier has not migrated my meter by the end date?

The programme rule is that all suppliers must have migrated all MPANs by M15, with shortfalls escalated through its governance. The pages checked set out no customer remedy, so the practical step is to ask the supplier where the supply point stands.

Can I see my half-hourly data before my supplier migrates me?

If the meter is smart or advanced, probably yes. GOV.UK says non-domestic customers and anyone they nominate can request up to 12 months of historic smart or advanced meter data from their supplier. The data rights it describes apply to those two meter types.

Request a renewable energy for businesses quote

By submitting you agree to our privacy policy. We never sell your details.

Related guides

Request a quote
Request a quote