renewableenergyforbusinesses

How Battery Storage Saves a Business Money

Updated 20 October 2026 · Renewable Energy for Businesses

Looking at battery storage or backup power for your site?

Request a quote

Which parts of a business electricity bill can a battery change?

A battery does not make electricity. It moves it in time, so its value depends on how your bill is built. Distribution charges show this well. Southern Electric Power Distribution's 2026/27 charging statement lists the parts of a site-specific bill: a fixed daily charge, a capacity charge per kVA per day for the import and export capacity you have agreed, an extra charge if you exceed it, three unit charges that depend on the time of day, and a reactive power charge. Northern Powergrid describes the same building blocks for its industrial and commercial customers.

Bill elementCan a battery change it?How
Time-of-day unit chargesYesCharge in cheaper bands or from solar, discharge in the most expensive band
Agreed capacity chargeIndirectlyLower peaks can avoid buying more capacity as loads grow
Exceeded capacity chargeYesDischarge to hold demand under the agreed limit
Residual chargeNoFixed, and set by charging band
Energy priceDepends on contractOnly if your supply tariff varies by time of day

The residual element is the one that has changed most. Ofgem's Targeted Charging Review decided that residual charges would be levied as fixed charges for all households and businesses, and the 2026/27 statement recovers them through fixed charges, with every site in a given band paying the same. Moving demand to another time of day does not reduce them, so challenge any proposal that counts residual savings from a battery.

How do red, amber and green time bands work?

Each distribution network operator publishes its time bands in its annual charging statement, and the hours differ by region. In Southern Electric's 2026/27 statement, for example, the red band for low and high voltage sites runs from 16:30 to 19:30 on weekdays, including bank holidays, all year. Check the statement for your own area, or ask your supplier, before modelling anything.

The battery logic is simple: charge in green or amber periods, or from surplus solar, and discharge through the red band. How much of that difference reaches you depends on your contract. Northern Powergrid says that for small businesses its charges are generally not visible because they are included in the supplier's bill, while industrial and commercial customers may see them identified. A business case built on red-band savings needs a supply contract that actually passes time-of-day costs through.

Can a battery reduce capacity charges?

Your agreed import capacity is charged every day, whether or not you use it, and going over it costs more. Under the same Southern Electric statement, exceeded capacity is charged for the full month in which the breach occurs, and an agreed capacity can only be reduced once in a 12 month period. If you reduce it, the original capacity may not be available later without network reinforcement and the charges that come with it.

A battery helps in two ways. It can discharge during short spikes, such as a production line starting up, so demand stays below the limit. It can also let you add EV chargers or heat pumps without asking for more capacity, by covering the extra load at peak times. Both rely on good controls: a battery that is empty when the spike arrives saves nothing.

How does a battery add to the value of on-site solar?

Without storage, solar output your site cannot use at the moment it is generated is exported. The SEG, Ofgem's export payment scheme, pays for exports from eligible installations of up to 5MW, but each SEG licensee sets its own rate, contract length and terms, and the only floor is that rates must be above zero. Storing the surplus and using it later replaces units you would otherwise import, so the battery's value from solar is the gap between your import rate when you use the stored energy and the export rate you gave up.

That gap varies by site. A business with high weekday daytime demand may export very little and gain little from storage, while one that closes at weekends or has a large evening load may export much more. Half-hourly data overlaid on a modelled solar profile shows which you are. If you are weighing solar, storage and charging together, the guide to integrated solar, battery and EV charging systems explains how they share one connection, and the commercial battery storage page covers typical uses.

Can a business battery earn money from flexibility services?

It can, but treat this income as a bonus rather than the core case. The National Energy System Operator says its forecasts show a need for four or five times today's battery capacity by 2030, and it runs several markets that batteries can join.

Its Demand Flexibility Service rewards homes and businesses for changing when they use electricity at times the system needs support. It became year-round on 27 November 2024, and from 9 April 2026 eligible participants may also be rewarded for using electricity when that helps balance the system, not only for using less. Taking part needs a business in England, Scotland or Wales, a supplier or aggregator registered for the service, and a working smart meter.

NESO also buys fast frequency response. Dynamic Containment, Dynamic Moderation and Dynamic Regulation together keep system frequency within 50Hz plus or minus 1%, and a unit must complete pre-qualification before it can take part in their auctions. Any flexibility contract should leave enough charge in reserve for the site's own peak shaving, or it can cost more in capacity charges than it earns.

How should a business battery be sized?

A battery has two sizes that matter: power in kW, which sets how fast it can charge or discharge, and energy in kWh, which sets how long it can keep going. Peak shaving needs enough power to cover the spike; red-band shifting needs enough energy to last the whole window. Sizing should come from a year of half-hourly data and answer four questions:

  1. How many kWh does the site use in the most expensive band on a typical weekday, and how does that change through the year?
  2. How high and how long are the peaks that push demand towards the agreed capacity?
  3. How much solar surplus is there, now or after a planned array, and when does it occur?
  4. Which new loads, such as EV chargers or heat pumps, are coming, and when will they run?

Compare proposals on the same basis: usable capacity, warranted throughput, the control strategy and who maintains it. The savings calculator gives a first indication, but any supplier's model should show its workings.

Which connection and safety rules apply?

  • Grid connection: Engineering Recommendation G99 is a legal requirement for certain generators connecting on or after 27 April 2019. Electricity North West explains that storage is exempt from some G99 requirements but must meet others, and that generation from 0.8kW to under 1MW connecting below 110kV is classed as Type A. Agree the connection route with your network operator before equipment is ordered.
  • Installer standard: MCS's battery installation standard, MIS 3012, covers installations up to 50kW. For anything larger, ask which design standards and competence the contractor will work to.
  • Fire safety: under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must make a suitable and sufficient fire risk assessment and review it when there has been a significant change. Adding a lithium-ion battery is a good reason to review it, and to tell your insurer before installation.

To compare proposals for your own site, read the battery storage guide and request quotes through the quote form; enquiries are passed to companies that can do the work.

Sources

  • Ofgem, Targeted Charging Review: decision and impact assessment, checked 20 October 2026.
  • Southern Electric Power Distribution (SSEN), Use of system charging statement 2026/27, checked 20 October 2026.
  • Northern Powergrid, About us, checked 20 October 2026.
  • Ofgem, SEG scheme page, checked 20 October 2026.
  • National Energy System Operator, Demand Flexibility Service explained; Dynamic services; Battery storage, checked 20 October 2026.
  • Electricity North West, G99 guidance, checked 20 October 2026.
  • MCS, Battery Installation Standard MIS 3012 announcement (23 November 2021), checked 20 October 2026.
  • legislation.gov.uk, Regulatory Reform (Fire Safety) Order 2005, article 9, checked 20 October 2026.

Guides on this topic

Common questions

Does a battery reduce the fixed residual charge on my bill?

No. Following Ofgem's Targeted Charging Review, residual charges are fixed and applied by charging band, so they do not change with the time you use electricity. A battery can only affect the time-of-day unit charges, capacity-related charges and, depending on your contract, the energy price.

Is a battery worth it without solar panels?

It can be, if your supply contract passes time-of-day costs through and your demand has expensive peaks or capacity pressure. Without solar the battery only shifts grid imports, so the case rests on the gap between bands and any capacity savings.

Can a battery help us add EV chargers without upgrading our supply?

Sometimes. If the chargers would only push demand over your agreed capacity for short periods, a battery with good controls can cover those peaks. Whether that works depends on how long the peaks last and how full the battery is when they arrive.

Do I need to tell the network operator before installing a business battery?

Generally, yes. Storage that runs in parallel with the grid falls under the connection rules in Engineering Recommendation G99, which is a legal requirement for certain generators, although storage is exempt from some of its requirements. Your contractor should handle the application and agree any export limits before the equipment is ordered.

Request a renewable energy for businesses quote

By submitting you agree to our privacy policy. We never sell your details.

Related guides

Request a quote
Request a quote