renewableenergyforbusinesses

Meter Operators and Data Collectors: Who Runs a Half-Hourly Meter and Its Data

Updated 10 November 2026 · Renewable Energy for Businesses

Want to cut what your site uses and pays for energy?

Request a quote

Who are the agents behind a half-hourly supply?

A supplier carries the responsibility for metering and settlement, but agents do most of the work. Ofgem explains that suppliers have overall responsibility for their obligations under the Balancing and Settlement Code (BSC), and that the code lets them appoint agents to act for them as data collectors, data aggregators and meter operator agents.

RoleLegacy nameName under market-wide half-hourly settlementWhat it doesWho appoints it
Meter operatorHalf Hourly Meter Operator (HHMO); Meter Operator Agent (MOA)Metering Service (Advanced), MSA, for advanced meters; Metering Service (Smart), MSS, for smart and non-smart metersInstalls, commissions, tests and maintains the meter, fixes technical faults and replaces a faulty meterThe supplier, unless the customer appoints its own
Data collectorHalf Hourly Data Collector (HHDC); Non Half Hourly Data Collector (NHHDC)Advanced Data Service (ADS) or Smart Data Service (SDS)Retrieves, validates and processes the meter's dataThe supplier, unless the customer appoints its own
Data aggregatorHalf Hourly Data Aggregator (HHDA); Non Half Hourly Data Aggregator (NHHDA)Removed; the Market-wide Data Service aggregates centrallyCombines collectors' data and passes it on for settlementThe supplier, under the legacy rules

The legacy definitions come from Elexon's glossary, the data service names from Elexon's qualification page, and the metering service names from the target operating model that the programme's Design Working Group recommended to Ofgem in February 2019. One governance point is easy to miss: Ofgem's 2022 decision on code change P332 records that metering activities for these supplies transferred from the BSC to the Retail Energy Code on 1 September 2021, so meter operators are now governed under that code.

Who appoints the agents, and who pays for them?

By default, the supplier. Ofgem calls this the supplier hub principle: the supplier appoints and manages the agents to meet its obligations, including performance targets, and the agents it appoints have a contract with it. A business can appoint its own instead, as the half-hourly settlement guide notes. Ofgem calls these customer preferred agents, and says the supplier stays responsible for meeting the code even where it has no contract with them.

That choice decides who pays whom. This guide found no official price list for agent services, so the price is whatever the supply contract or the agent's own contract says. Ofgem's guide for businesses suggests shopping around for half-hourly qualified agents, marked HHMOA, HHDC and HHDA, to look for cheaper prices, and warns that the agent's contract length should match the supply contract. Whichever route applies, ask the supplier which agents serve each MPAN on the site and how their charges reach the bill; the MPAN guide shows where to find the number.

What changes for agents under market-wide half-hourly settlement?

The new roles arrived first. Elexon says new MHHS-related agent roles were introduced at programme milestone M8 on 22 September 2025: some are new functions, and others are updated equivalents of roles to be retired at milestone M15 on 7 May 2027.

Agents qualified under the old scheme could keep working without meeting the new MHHS standards only until 28 October 2026, milestone M14. After that date, Elexon says, they must be MHHS qualified to operate, even while dual settlement continues. The programme's senior responsible owner approved M14 on 27 October 2026, the milestone at which all suppliers must be able to access MPANs under the new model. Elexon runs legacy and MHHS settlement side by side until the final reconciliation run for the last settlement day before M15.

Aggregation is the clearest change. Elexon has built new central systems for the programme, including a Market-wide Data Service that will aggregate data for smart, non-smart, advanced and unmetered supplies for use in settlement. For a business, the practical effects are new names on contracts and data flows, and a check that the agents serving the site are qualified for the new arrangements. The settlement change itself is covered in the half-hourly settlement guide.

What should a metering or data contract cover?

  • Length. Match it to the supply contract, as Ofgem advises, so neither runs on after the other ends.
  • What the charge covers. Installation, maintenance, data retrieval and site visits, how each is billed, and how prices can change.
  • Data. What the business receives, in what format and how often, and whether a nominated adviser can receive it too.
  • Service. Fault response and missed-read handling only as the contract states them; nothing beyond the written terms should be assumed.
  • Commissioning. For a current transformer (CT) metered site, ask who holds the commissioning records, since commissioning is one of the meter operator's core tasks.
  • Handover. How readings, meter details and communications pass to a new supplier or agent; Elexon lists missed change-of-supplier readings and communications that do not work after a change of supplier among the causes of bad settlement data. The guide to switching business energy supplier covers the move itself.

How can a business get its own half-hourly data?

From the supplier. GOV.UK says that since 1 December 2022 non-domestic customers of all sizes, and third parties they nominate, can request up to 12 months of historic smart or advanced meter data from their supplier, which must respond within 10 working days. Suppliers must also regularly tell non-domestic customers how to access the data or nominate someone else to.

From the data collector or data service. This is the party that retrieves, validates and processes the meter's half-hourly data. A business that appoints its own collector holds that contract, so it can write delivery of its own data into the terms.

From its own equipment. A monitoring system on the business's side of the meter gives a separate live record, as the sub-metering guide explains.

Data earns its keep when it changes decisions about plant, controls and tariffs. The energy management page shows how half-hourly data feeds monitoring, targets and the projects that follow.

What happens when agent errors lead to wrong bills?

Most billing problems that trace back to agents start with missing or wrong data. Elexon's performance assurance pages list points of failure that can put erroneous or estimated data into settlement, including:

  • site access problems, including customers not providing access;
  • meter and site details that are incomplete, inaccurate or missing;
  • remote reading systems that fail, with no manual read taken instead;
  • readings not taken at a meter exchange or change of supplier;
  • data not reprocessed when additional information becomes available.

If a bill looks wrong, raise it with the supplier first, because it appoints and answers for the agents, and keep the site's own readings and half-hourly data as evidence. How far back a corrected bill can reach depends on the size of the business and its contract, as the back-billing guide explains. A site that wants its data turned into an energy plan can send an enquiry through the form on the energy management page.

Sources

All pages checked 10 November 2026. Programme dates can move, so Elexon's and the MHHS Programme's pages are the authority if they differ from this guide.

Common questions

Is a meter operator the same as a supplier?

No. The supplier sells the electricity and carries responsibility for metering and settlement. The meter operator is an agent that installs and maintains the meter, usually appointed by the supplier, although a business can choose its own.

Do I have to change my agents when MHHS arrives?

Not necessarily, but the roles are being renamed and the old ones retire at milestone M15 on 7 May 2027. Agents had to be qualified for the new arrangements after 28 October 2026 to keep operating, so ask whether yours are.

What is a data aggregator, and does it still exist?

Under the legacy rules a data aggregator combined data from collectors and passed it on for settlement. Elexon says the half-hourly and non-half-hourly aggregator roles are being removed under the new model, with aggregation done by its central Market-wide Data Service.

Can I get my half-hourly data without changing agents?

Usually yes. GOV.UK says non-domestic customers and third parties they nominate can request up to 12 months of historic smart or advanced meter data from their supplier, which must respond within 10 working days.

Request a renewable energy for businesses quote

By submitting you agree to our privacy policy. We never sell your details.

Related guides

Request a quote
Request a quote