UK Wind Speeds by Region: What Is the Average Wind Speed in the UK?
Updated 23 October 2026 · Renewable Energy for Businesses
Thinking about a wind turbine for your site?
Request a quoteWhat is the average wind speed in each UK region?
The Met Office publishes long-term averages for its climate stations and for the climate districts they belong to. The table gives each district's 1991 to 2020 mean wind speed at 10 metres in knots, as published, with metres per second converted at the Met Office's factor of 0.514. Districts are Met Office climate areas, not government regions, so the guide links are the nearest match rather than an exact fit.
| Met Office district | Mean wind, knots | About m/s | Nearest guides |
|---|---|---|---|
| Scotland (whole country) | 10.76 | 5.5 | Scotland |
| Wales (whole country) | 9.80 | 5.0 | South Wales |
| England north west and north Wales | 9.41 | 4.8 | North West |
| England south west and south Wales | 9.33 | 4.8 | South West, South Wales |
| UK | 9.27 | 4.8 | All of the guides above |
| England east and north east | 8.96 | 4.6 | North East, Yorkshire and the Humber |
| Northern Ireland | 8.57 | 4.4 | Northern Ireland |
| East Anglia | 8.12 | 4.2 | East of England |
| Midlands | 7.81 | 4.0 | East Midlands, West Midlands |
| England south east and central south | 7.76 | 4.0 | South East, London |
Inside Scotland the north district is windiest at 11.23 knots, ahead of the west at 10.6 and the east at 10.25. The Met Office's county ranking for 1981 to 2010 puts Shetland first at 14.6 knots and Orkney second at 14.3, with Gwynedd (11.3) and the Isle of Wight (10.7) also in the top ten, so exposed Welsh and English coasts can match Scottish ones. The Met Office says the windiest parts of the UK are generally the north and west, because prevailing west to south-westerly winds reach them first.
Northern Ireland's government advice calls its wind resource one of the best in Europe, while the Met Office district figure at 10 metres is 8.57 knots. Use these numbers as context and the site assessment as the decision.
What is a normal wind speed in the UK?
An average wind speed is the mean of readings over a long period: the Met Office figures above are 1991 to 2020 means at 10 metres above open ground. The district averages in the table run from 7.76 to 10.76 knots. On the Met Office Beaufort scale that is a gentle breeze (force 3, 7 to 10 knots) at the low end and close to a moderate breeze (force 4, from 11 knots) at the top; a gale (force 8) starts at 34 knots. The average wind speed at your own location can sit well above or below its district, and the sections below show how to check it.
If the figure for your site comes out near the 5 m/s line, the page on wind turbines for business covers what comes next, and quote requests sent through the form on this page get a reply by email.
Why do these averages sit below the 5 m/s rule of thumb?
The Energy Saving Trust advice, as repeated by Northern Ireland's nidirect, is to consider a turbine only where the local annual average wind speed is 5 m/s or more and no major obstacles nearby reduce the wind or add turbulence. NetRegs says the Trust does not recommend a small-scale turbine below 5 m/s. In the table, Scotland and Wales reach 5 m/s at 10 metres and every other district sits below it.
The comparison is not like for like. Met Office anemometers sit at the top of a 10 metre mast, wind speed normally increases with height, and buildings, trees and other obstacles affect it. A turbine on a taller tower meets faster air than the table shows; a site among obstacles meets slower, more turbulent air. A turbine is also rated at a much higher speed: MCS defines small wind by a rating measured at 11.0 m/s.
That is why the table is a screening aid. MCS's performance method for small wind (MCS 033, published December 2024) offers two routes: a Global Wind Atlas lookup of the mean wind speed at the location, which replaced the NOABL dataset because the government no longer supports or updates it, or at least six months of on-site monitoring. This page quotes no atlas figures, because the atlas is an interactive tool: look up your own coordinates, at the height of your tower.
How much does wind speed vary within one region?
A great deal. The table pairs an exposed and a sheltered Met Office station from the same district. They are examples from the stations checked for this page, not the full range.
| Met Office district | Exposed station | Mean wind, knots (about m/s) | Sheltered station | Mean wind, knots (about m/s) |
|---|---|---|---|---|
| Scotland, north | Lerwick | 14.73 (7.6) | Kinloss | 9.00 (4.6) |
| Scotland, east | Fraserburgh | 12.61 (6.5) | Edinburgh (Gogarbank) | 8.15 (4.2) |
| Scotland, west | Tiree | 14.17 (7.3) | Glasgow (Bishopton) | 7.57 (3.9) |
| Northern Ireland | Killowen | 10.26 (5.3) | Katesbridge | 6.03 (3.1) |
| England north west and north Wales | Valley | 12.42 (6.4) | Hawarden Airport | 7.07 (3.6) |
| England south west and south Wales | Aberporth | 13.11 (6.7) | Exeter Airport | 7.68 (3.9) |
| England east and north east | Bridlington | 9.95 (5.1) | Linton on Ouse | 7.57 (3.9) |
| Midlands | Wittering | 9.48 (4.9) | Sutton Bonington | 6.78 (3.5) |
| East Anglia | Weybourne | 12.20 (6.3) | Marham | 9.01 (4.6) |
| England south east and central south | Isle of Wight (St Catherines Point) | 11.57 (5.9) | Kew Gardens | 5.30 (2.7) |
Tiree and Glasgow Bishopton are in the same west of Scotland district, yet one averages 14.17 knots and the other 7.57. Weybourne in East Anglia, at 12.20, is windier than Glasgow Bishopton. Kew Gardens averages 5.30 knots against 11.57 at St Catherines Point on the Isle of Wight. The Met Office notes that most hills, mountains and coasts are windier than low-lying inland areas, so a business on an open coast or ridge in a calm district can beat a sheltered site in a windy one.
How do you check whether your site is windy enough?
- Read your nearest Met Office station, converting knots at 0.514, as context only. Station pages give monthly and annual means for 1991 to 2020.
- Look up the modelled mean wind speed for your coordinates at your intended hub height, the first MCS 033 method.
- Walk the site. Note buildings, trees and hills nearby: the Trust's condition is that none are large enough to cut the wind or add turbulence. Planning guidance uses the turbine's height to blade tip plus 10% as a common safe separation distance.
- If the modelled figure is near or above 5 m/s, measure. MCS 033 allows at least six months of monitoring; Northern Ireland's guidance says ideally a professional assessment for a full year at the exact location.
- Carry the measured speed into the sums: the sizing guide turns a capacity factor into kWh, and the lifespan guide covers what the machine costs to keep running.
Where on-site wind sits against solar is covered on the wind and CHP page; what a commercial wind turbine costs is set out per kW by size, and the wind turbine output calculator will estimate a turbine's yearly output from the speed you measure; for a view on a specific site, the cost guide shows indicative ranges beside the other technologies and you can request a quote through the form on this page.
Sources and last checked
All pages below were checked on 22 October 2026. Wind figures are Met Office long-term averages for 1991 to 2020, except the county ranking, which covers 1981 to 2010. To cite this page: UK Wind Speeds by Region, renewableenergyforbusinesses.co.uk, Met Office averages, last checked 22 October 2026.
- Met Office, Location-specific long-term averages (UK, 1991-2020)
- Met Office, How the Met Office measures wind
- Met Office, Beaufort wind force scale
- Met Office, Where are the windiest parts of the UK?
- nidirect (Northern Ireland government), Wind
- NetRegs (SEPA and NIEA environmental guidance for business), Wind energy
- MCS (Microgeneration Certification Scheme), MCS publishes updates to small wind turbine Standards (6 December 2024)
- DESNZ, GOV.UK, Permitted development rights for onshore wind turbines in England: consultation document (18 March 2026)
- MHCLG, GOV.UK, Renewable and low carbon energy (planning practice guidance) (14 August 2023)
- Met Office, location-specific long-term averages, station pages: Lerwick, Aberporth, Blackpool (Squires Gate), Boulmer, Aldergrove, Weybourne, Nottingham (Watnall), Heathrow, Glasgow (Bishopton), Dyce, Kinloss, Fraserburgh, Edinburgh (Gogarbank), Tiree, Killowen, Katesbridge, Valley, Hawarden Airport, Exeter Airport, Bridlington, Linton on Ouse, Wittering, Sutton Bonington, Marham, Isle of Wight (St Catherines Point), Kew Gardens
Common questions
Is a forecast wind speed the same thing as a turbine's wind speed?
No. Met Office observations are reported at 10 metres, and the Met Office defines the wind it reports as the average over the ten minutes before the reporting time. A turbine needs the long-run annual mean at its own hub height, which comes from a modelled lookup or months of measurement.
Why does the Met Office quote knots?
The Met Office publishes wind speeds in knots. Its Beaufort scale guide says to multiply knots by 0.514 for metres per second, or by 1.15 for miles per hour. The tables on this page apply that factor.
Can I use the nearest airfield's wind speed for my site?
Only as context. Stations in the same district differ widely, because hills, mountains and coasts are mostly windier than low-lying inland areas and obstacles slow and disturb the wind. Model and then measure the wind at your own site.
Do average wind speeds tell me whether a turbine will pay back?
No. They show typical wind at 10 metres. Output depends on the speed at hub height, the turbine, the site's demand and the planning and grid position, which the sizing guide walks through.