DALI Lighting Control Systems: What They Do and When a Business Needs One
Updated 10 November 2026 · Renewable Energy for Businesses
Want to cut what your site uses and pays for energy?
Request a quoteDALI often arrives on a quote bundled with an LED upgrade, priced as an extra. This guide explains what it is, how it differs from the cheaper options a quote may offer, what an addressable system makes possible, including emergency light testing, what the Building Regulations say about lighting controls in England, how to specify one, and when it is not worth the money. Saving ranges for LED and controls are in the LED lighting and controls guide.
What is DALI, and who maintains it?
DALI, short for Digital Addressable Lighting Interface, is a protocol for digital lighting control. It is specified in the multi-part international standard IEC 62386 and in further specifications from the DALI Alliance, the industry body that maintains it, whose formal name is the Digital Illumination Interface Alliance (DiiA). Power and data share one pair of wires, with no separate bus cable, and the wires can be connected either way round.
- DALI-2 is the Alliance's certification programme for the latest version of the protocol. Test results are independently verified before a product is certified, whereas compliance with the original version was self-declared, which the Alliance says led to interoperability problems. Certified products are listed in its public product database, and a product that is not listed is not certified. DALI-2 also added control devices, such as sensors and application controllers, which the original standard did not cover.
- D4i extends DALI-2 certification to luminaires that report data: D4i LED drivers can store and report luminaire, energy and diagnostic data in a standard format.
The Alliance sets the size of one DALI line, or subnet: up to 64 control gear, such as LED drivers, and 64 control devices, such as sensors, with each item of control gear holding 16 scenes. The cable between the furthest-apart devices can run to 300 m. Beyond those limits, a building uses more than one subnet.
How does DALI compare with other lighting controls?
A quote may offer any of these. The analogue, DALI and wireless rows follow the DALI Alliance as protocol owner; the switching and sensor rows reflect the controls Approved Document L describes.
| Approach | How it controls | Each light addressable? | Reports faults or energy? | Suits |
|---|---|---|---|---|
| Switching, manual or timed | Whole circuits on and off | No | No | Small spaces with fixed hours |
| Standalone presence or daylight sensors | Each sensor switches or dims the lights wired to it | No, only by circuit | No | Rooms used in bursts; areas near windows |
| 0-10 V or 1-10 V analogue dimming | One-way analogue signal to drivers; wiring polarity matters | No | No | Simple dimming of fixed groups |
| DALI or DALI-2 | Two-way digital commands on a two-wire bus | Yes, up to 64 control gear per subnet | Failures and status; energy with D4i drivers | Large or multi-zone spaces whose layout changes |
| Wireless control through DALI gateways | A wireless network commanding wired DALI products via a gateway | Depends on the system | Depends on the system | Refits where new cabling is hard |
Older proprietary digital systems also exist. Whatever is offered, ask whether the controls follow an open standard such as IEC 62386, so that another contractor can maintain them later.
What does an addressable system make possible?
- Re-zoning in software. Devices can be grouped and regrouped by reprogramming, without changing the wiring, so a floor that is re-planned can be re-zoned without an electrician rewiring it.
- Presence and daylight control at each fitting. DALI-2 input devices include occupancy and light sensors, and application controllers, which the Alliance calls the brains of the system, use that information to send commands.
- Scenes and schedules. Commands can go to one device, a group or all devices, and a single command can recall preset levels from the 16 scenes each driver holds.
- Fault reports. Because DALI is two-way, a device can report a failure or answer a query about its status.
- Energy data. DALI data specifications let LED drivers supply data for performance monitoring, asset management, diagnostics and energy metering. Approved Document L accepts a lighting management system that calculates consumed energy and passes it to a building management system as one way to meter lighting; the sub-metering guide covers other meters.
What these controls save depends on the space and its hours. Measured lighting energy also helps a building pursuing the UK Net Zero Carbon Buildings Standard, which is focused on measured outcomes, or the energy credits explained in the BREEAM guide. The energy management page puts lighting alongside the other measures a site can take.
Can DALI test emergency lighting automatically?
BS 5266-1 is the UK code of practice for emergency lighting of premises. BSI published a full revision, BS 5266-1:2025, in October 2025: it covers design, installation and wiring, now extends to local area and standby lighting as well as escape lighting, and aligns with the European standards EN 1838 and EN 50172. Testing is part of running the system; Merseyside Fire and Rescue Service, for example, says a premises log book should record monthly and annual emergency lighting tests in accordance with BS 5266, including a monthly mains failure simulation. The standard itself is sold by BSI, and its test schedule is not reproduced here.
DALI can automate those tests for self-contained emergency fittings, which carry their own battery in or next to the luminaire. The DALI Alliance says emergency control gear under part 202 of IEC 62386 must run a function test, a quick check of the fitting's emergency supply, charging circuit, driver or relay and lamp, and a duration test showing the fitting can run its lamp for the full rated duration, such as 1 or 3 hours. Tests can be triggered by DALI commands or a timer, and a building management system can collect the results. Approved Document L's definition of fixed building services excludes emergency escape lighting, so the energy rules below do not apply to it.
What do the Building Regulations say about lighting controls?
In England, Approved Document L, Volume 2 covers buildings other than dwellings. The current 2021 edition, which took effect on 15 June 2022, says:
- lighting controls in new and existing buildings should follow BRE Digest 498;
- unoccupied spaces should have automatic controls to switch general lighting off when not in use, for example through presence detection, and occupied spaces should have them where suitable;
- general lighting in occupied spaces should have daylight controls, such as photo-switching and dimming, where high levels of natural light are likely;
- general lighting should average 95 luminaire lumens per circuit-watt, or meet the LENI method instead.
The efficiency standards apply to new fixed building services in new or existing buildings, and a replacement service should be at least as efficient as the standard, so relighting an existing building is caught. The Non-Domestic Building Services Compliance Guide that older specifications cite was replaced by Volume 2 in the changes announced on 15 December 2021. A 2026 edition takes over from 24 March 2027 for work other than higher-risk building work, subject to transitional arrangements: it keeps the controls guidance, raises general lighting to more than 105 luminaire lumens per circuit-watt and asks for key-card or occupancy controls in hotel bedrooms.
How should a DALI system be specified and commissioned?
- Write a control strategy for each space: how it is used, its hours and daylight, the scenes needed and who may change settings. Approved Document L points to BRE Digest 498 for choosing controls.
- Specify DALI-2 certified products, with D4i drivers where energy or diagnostic data is wanted, and check each one in the DALI Alliance product database before ordering.
- Plan the subnets within 64 control gear, 64 control devices and 300 m of cable each, with a bus power supply for every system.
- Address and commission: give each device its address, set up groups and scenes, and set and test sensors in the rooms they serve.
- Hand over records. Approved Document L expects completed commissioning records with the building's information; for DALI that should include the address map, groups, scenes and controller settings.
- Control later changes: decide who can alter settings and how changes are logged, so the strategy survives re-planning and staff turnover.
- For a refit, choose the route: DALI drivers or luminaires can go in at relamping, and where new cabling is hard, wireless-to-DALI gateways let wired DALI products work in a wireless system.
No official price exists for controls or commissioning. The cost follows the number of addressable devices, the commissioning time and any integration with a building management system.
When is DALI not worth it?
When the space is small, used for fixed hours and lit by a handful of fittings on one or two circuits. A time switch or standalone presence and daylight sensors then deliver most of the control for less, and Approved Document L asks for automatic and daylight controls, not addressable ones. DALI also adds little where nobody will read the data: fault and energy reports only help if someone acts on them. Readers weighing lighting controls against other energy measures, or wanting a site scoped, can use the enquiry form on the energy management page.
Sources
All pages checked 10 November 2026; the standards bodies' pages are the authority if they differ.
- DALI Alliance (DiiA): Introducing DALI; DALI-2 certification; Key features; Systems and components; D4i; DALI data; DALI emergency; Wireless to DALI gateways
- BSI: BS 5266-1:2025 Emergency lighting of premises, code of practice (29 October 2025)
- Merseyside Fire and Rescue Service: Fire risk assessments
- MHCLG and DLUHC, GOV.UK: Approved Document L, Volume 2, 2021 edition incorporating 2023 amendments; Approved Document L, Volume 2, 2026 edition; Building Regulations circular letter (15 December 2021)
- UK Net Zero Carbon Buildings Standard: What is the Standard
Common questions
What is the difference between DALI and DALI-2?
DALI-2 is the DALI Alliance's certification programme for the latest version of the protocol. Its test results are independently verified, while version-1 compliance was self-declared, and it covers control devices such as sensors as well as drivers.
Can DALI be added to existing lighting?
Yes, usually at relamping or refit, when DALI drivers or luminaires replace the old gear. The DALI bus is a two-wire cable, typically standard two-core; where new cabling is hard, the DALI Alliance's wireless-to-DALI gateway specifications let wired DALI products work with a wireless system.
How many lights can one DALI line control?
Up to 64 control gear, such as LED drivers, plus 64 control devices such as sensors, according to the DALI Alliance. A larger building simply uses more than one line, or subnet.
Does DALI make emergency lighting checks unnecessary?
No. It can run and log function and duration tests automatically for self-contained emergency fittings, but the responsible person for the premises still needs a testing and record-keeping regime, and someone has to review the results.