renewableenergyforbusinesses

How to Compare Business Energy Quotes Like for Like: The Lines That Change the Total

Updated 10 November 2026 · Renewable Energy for Businesses

Not sure which technology fits your site?

Request a quote

Why does the lowest unit rate mislead?

Because the unit rate is one line of several. A quote also carries a standing charge, which Ofgem describes as a fee paid each day even if no energy is used that day, and it may carry a capacity charge, items passed through as they arise, Climate Change Levy, VAT and a broker's fee built into the price. Business energy has very few published prices, Ofgem notes, so each quote is built for you on the consumption, dates and terms the supplier or broker assumed. Two quotes built on different assumptions cannot be ranked by their headline rates.

Which lines need to match before you compare?

Line up each item below across every quote before doing any arithmetic. The guide to non-commodity costs explains the network and policy charges behind several of these lines.

Item to line upWhere it appearsWhy it changes the totalWhat to ask
Consumption basisQuote assumptions or summaryEvery annual figure is built on it, and Ofgem says broker commission is based on consumption figuresWhich kWh figure was used? Give every bidder the same one, from actual reads
Start date and lengthContract datesPrices move with the market, and dated charges such as the levy change on set daysThe same start date and term on every quote
Unit rates by bandRates scheduleDay, night or time-of-use bands each multiply a different share of useYour split of kWh by band, from meter or half-hourly data
Standing chargeRates schedule, in pence per dayPaid for every day of the term, whatever the useThe charge per meter, per day
Capacity chargeHalf-hourly supplies with CT meteringOfgem says the network operator charges for the capacity it reserves for the siteIs it inside the price, passed through or billed separately, and on what kVA?
Fixed or pass-through costsPrice basis and termsOfgem notes some charges may be added to the price when the supplier knows themWhich lines are fixed for the term, and which can move?
Climate Change LevyA separate line, or inside the rate0.801p per kWh at the main rate from 1 April 2026 and 0.827p from 1 April 2027Is it included, and at which rate for each period?
VATTotalsCharged on the whole supply, usually at 20% for business useAre all quotes before VAT, or all after it at the same rate?
Broker feePrincipal termsPaid through the price the business signsThe fee in writing, and whether the principal terms show it
Green or REGO-backed supplyProduct name and termsMay be priced differently from a standard supplyHow much of the volume is covered, and at what difference in price?
Payment terms and depositTerms and credit decisionA deposit ties up cash, and Ofgem says a different payment method can change the dealDeposit amount, refund terms and payment method
How long the price holdsQuote validityAn expired price has to be requotedThe expiry date and time, in writing
End-of-contract termsRenewal clauseA rollover or out-of-contract rate can cost moreWhat happens if nothing new is agreed at the end?
Early exit feeTermination clauseLimits leaving before the end of the termThe fee, and when it applies

How do you work out the annual total?

  1. Multiply each unit rate by the kWh expected in its band, and add the results.
  2. Multiply the standing charge by the number of days in the year or term.
  3. Add any capacity charge and any other fixed charges the quote lists.
  4. Add Climate Change Levy on the kWh at the rate for each period, unless it is already inside the unit rate or the supply is excluded.
  5. Add VAT on the whole amount, at the same rate for every quote.
  6. Divide the total by the kWh to get an effective price per kWh, and rank the quotes on it.

A hypothetical example, with round numbers that are not real or typical prices: a site uses 50,000 kWh a year on a single rate. Quote A is 22.0p per kWh with a standing charge of 50p a day; quote B is 21.5p per kWh with 250p a day. Over 365 days A comes to 1,118,250p and B to 1,166,250p, or about 22.4p and 23.3p per kWh. The quote with the lower unit rate is dearer by 48,000p, which is £480 a year in arithmetic on these hypothetical inputs. Adding the levy at 0.801p and VAT at 20% lifts both, to about 27.8p and 29.0p per kWh, without changing the order. The business electricity cost calculator does this sum for one quote at a time and shows the effective price per kWh.

What traps make two quotes look different when they are not?

  • Different consumption figures. A quote built on fewer kWh shows a smaller total without being cheaper. Ofgem adds that a business using more than the estimate behind a broker's commission still pays for its actual use, so the estimate should be accurate.
  • Different start dates. A contract starting in January runs its first three months at one levy rate and the rest at the next, while one starting in April does not.
  • A standing charge folded into the rate. If a quote shows one all-in unit rate, ask for the split, or compare effective prices at your own consumption.
  • Pass-through items described as fixed. Under a fixed-rate contract, Ofgem says, the unit rates and standing charges hold for its whole length, but some charges can be presented on a pass-through basis and added when the supplier knows them. Ask which lines can still move.
  • Commission not shown. Ofgem's guidance says broker costs that the supplier adds to the bill must be given to every business in the principal terms and on request, a rule its April 2024 announcement applied to contracts signed from 1 October 2024; a fee the business pays a broker directly does not appear there. The energy brokers guide sets out the checks.
  • A contract that rolls on. Ofgem advises knowing what happens at the end, such as automatic renewal or a move to out-of-contract or deemed rates; the contract renewal guide explains each outcome.
  • A quote that expires. Agree the expiry in writing and finish the comparison before it.

What changes for half-hourly and multi-site buyers?

Larger supplies add lines to compare. Sites with current transformer metering may pay for the capacity the network operator has reserved, so restate every bid on the site's agreed capacity and check whether the charge is inside the price or passed through. Suppliers appoint agents to read, collect and aggregate half-hourly data and to maintain the meter, and a business may appoint its own; check whether those charges sit inside each quote and whether a separate agent contract runs alongside the supply, as the meter operator and data collector guide explains. Flexible (structured) contracts, which Ofgem describes as suitable for large, energy-intensive businesses, buy energy in portions over time: ask about any volume band and the price of use outside it, and judge them as a buying policy rather than a single price, using the energy procurement strategy guide.

What should you do with the answer?

  1. Send every bidder the same consumption, start date and term, and ask for each quote restated on that basis, with the levy and VAT shown as separate lines.
  2. Rank the restated quotes by effective price per kWh, then check each against the table above.
  3. Get the chosen offer in writing before agreeing: Ofgem advises asking for a contract discussed on the phone in writing, and there is no cooling-off period.
  4. Sign, then diarise the end date and the notice deadline.

The business electricity price guide has official averages to set the winning figure against. If even the best supply contract leaves most of the bill exposed to the market, weigh it against longer-term options on the power purchase agreements and procurement page.

Sources

All checked 10 November 2026.

Common questions

Should I compare business energy quotes with or without VAT?

Either, as long as every quote is treated the same way. Most business electricity is charged at the standard 20%, and a VAT-registered business that reclaims its VAT may prefer to compare before VAT. Check that the rate on each quote matches how the site uses the energy.

Can a fixed-rate quote still change after I sign?

The unit rates and standing charges cannot: Ofgem says a fixed-rate contract fixes both for the length of the contract. Charges presented on a pass-through basis can still be added when the supplier knows them, so find out before signing which lines are fixed and which can move.

Is a quote from a comparison website the whole market?

Not necessarily. Ofgem suggests checking which suppliers a comparison website includes, whether it compares the whole market or only a selection, and whether it receives commission from suppliers. Treat its result as one more quote to line up with the others.

How do I compare a quote with a broker fee against one without?

Compare what the business will actually pay. A fee collected through the supplier is added to the bill through its charges, so it is already in the annual total; a fee paid directly to the broker is not, so add it to that quote before ranking. Ask for every fee in writing.

Does the temporary 0% VAT rate on electricity change the comparison?

Only for qualifying use. Qualifying supplies of electricity in Great Britain are zero-rated from 1 October 2026 to 31 March 2027 under the 2026 Order, and Budget 2026 announced an extension to 30 June 2027, due to be legislated in early 2027. Qualifying use means supplies under the de minimis limits, domestic use, a charity's non-business use or the qualifying share of mixed use; Northern Ireland stays at 5%, and ordinary business use stays at 20%.

Request a renewable energy for businesses quote

By submitting you agree to our privacy policy. We never sell your details.

Related guides

Request a quote
Request a quote