renewableenergyforbusinesses

Fixed or Flexible Energy Contracts for Business: How to Decide

Updated 28 October 2026 · Renewable Energy for Businesses

Want to cut what your site uses and pays for energy?

Request a quote

What are the main types of business energy contract?

Ofgem names fixed-rate, variable-rate and flexible contracts. Its intermediary guidance adds a pricing feature that cuts across them, called pass-through. The first question about any offer is which of these it is, because that decides what is set in advance and what can still move.

TypeSet in advanceCan still move
Fixed-rateUnit rates and standing charges for the whole term, so the cost per kWh stays the same whatever wholesale prices do.Anything the contract passes through. Ofgem says some regulated costs, such as network charges, may change depending on contract terms.
Variable-rateNothing about the price.The price can rise or fall during the contract, for example when wholesale prices change.
Flexible (structured)The way energy will be bought, in portions rather than all at once.The price depends on when the portions are bought. Ofgem describes these as suitable for large businesses that use a lot of energy.
Pass-through featureThe base energy price.Named charges, added once the supplier knows what they are.

Ofgem also notes that suppliers may use either business size or annual consumption to decide which contract or protections apply, so the options on offer to a small site may be narrower than the list above.

Should a business fix for three years?

No source can answer that for a particular business, and this guide gives no advice. What the sources show is what the choice involves. Ofgem's March 2026 blog says contract lengths were starting to return to 3 to 5 years, and advises asking suppliers what is available and considering both short and long-term options.

  • Certainty runs both ways. A fixed rate holds the cost per kWh when wholesale prices rise and when they fall.
  • A fix delays repricing, it does not remove it. Ofgem's April 2026 note says many customers are protected by fixed contracts where energy was bought in advance, and that higher wholesale costs may feed through when contracts end or are renegotiated.
  • Leaving is costly. Ofgem says a contract may last several years and may carry an early termination fee, and that most suppliers will not release a customer early without a termination clause or an exit fee.
  • The offer may not exist. Suppliers are not obliged to offer a business a contract, so the length a business wants may not be on the table.

Questions that settle it are about the business, not the market. How much movement in the energy bill can the budget absorb? How sure is the site's use over the term, given a possible move, closure or on-site generation? Which charges stay open? When would renewal fall? The contract renewal guide explains what happens at the end of the term.

How does a flexible contract work?

Ofgem says a flexible contract, sometimes called structured, lets a company buy energy in smaller portions when market conditions are better, rather than locking in one rate. The effect is to move the timing decision from a single quote date to a buying plan, so someone has to decide when to buy and by what rules.

The government's buying agency for public bodies shows the idea in practice. It describes a “buying window” as the time spent buying and collecting energy from the market before the energy is used, and says risk is usually lower when energy is bought over a longer time frame, which can mean less change from year to year. That page is written for public sector buyers, so it illustrates the principle and does not set terms for a private business.

Before agreeing to a flexible contract, ask who decides when each portion is bought, what limits or triggers apply, what happens to volume not yet bought when the supply starts, and who is paid for managing the purchases. The energy brokers guide covers how that fee can be built into the price.

A power purchase agreement is a separate tool. It sets the price of the part of the load it covers for its term, while the rest still sits under a supply contract of one of the types above, as the power purchase agreement and procurement page explains.

What does pass-through change?

Ofgem's intermediary guidance says some factors in energy bills may change during a contract, and that these may be presented on a pass-through basis, where they are added to the energy price once the supplier knows the charges. Ofgem says wholesale costs can be about 40% of an electricity bill and about 60% of a gas bill, so a quoted energy price is only part of the whole. How wholesale prices move, and where to read the official figures, is covered in the wholesale prices guide.

That makes the comparison with a rate that includes those charges an unequal one. Ask for both offers on the same basis, and check which charges are included. The non-commodity costs guide lists the main electricity charges, and the business electricity prices guide shows the official averages to compare against.

Which tariff structures can sit inside a business contract?

Rate structure is a separate choice from contract type. It sets how many unit rates a quote uses, when each applies and which charges come regardless of use, so two quotes of the same type can differ.

The plainest is a single rate, Ofgem's term for one unit rate across the whole day. Two-rate and multi-rate tariffs charge one unit rate in peak hours and another in a set off-peak period. Ofgem's glossary names Economy 7 and Economy 10 as day and night examples, the number giving the hours of night-time rate. A time-of-use tariff, in Ofgem's definition one whose charges vary by when the energy is consumed, goes further, and the time-of-use tariffs guide explains how to test one against a site's half-hourly data.

StructureHow the price is setWhich sites it suits
Single rateOne unit rate for every hour of the daySites that cannot move use between hours
Day and nightA day rate and a night rate, with the night hours set by the tariffSites using much of their electricity at night, such as those running a night shift
Multi-rate or time-of-useRates change by time band, so the bill needs metered data on when energy was usedSites able to move use off peak, where Ofgem says a business could pay less

Some charges ignore the units. Ofgem's glossary describes the standing charge as a fixed daily or monthly amount covering maintenance and other costs, such as keeping the connection to the power network. A site with a current transformer (CT) meter can also pay a maximum import capacity (MIC) charge, which Ofgem says the network operator charges for the network space reserved for it. The non-commodity costs guide shows where these sit on the bill.

If a fixed term ends without a new deal, the site can drop onto out-of-contract rates or, where supply carries on, a deemed contract, and Ofgem says both usually cost more than an agreed contract, as the contract renewal guide explains.

Where do REGO-backed green options sit?

A green option is a feature added to a contract of any type, not a fourth type. Ofgem says one REGO is issued for each megawatt hour of eligible renewable output, and that its main use is fuel mix disclosure by suppliers. The REGO guide covers what a certificate does and does not show.

Because one certificate covers one MWh, the volume matters. For example, a site using 120 MWh a year needs 120 certificates for full cover. In a fixed-rate contract, ask whether cover is set at the contract's estimate or follows metered use. In a flexible contract, ask whether certificates are bought with each portion or in one block. With pass-through, ask whether the certificate cost is in the base price or added later.

Gas follows the same logic with a different certificate: one RGGO per kWh of green gas, covered in the green gas guide.

Sources

Guides on this topic

Common questions

Does a fixed-rate contract fix my whole bill?

No. Ofgem says it fixes the unit rates and standing charges, so the cost per kWh stays the same, but the total still depends on how much energy the site uses. Some regulated costs, such as network charges, may change depending on the contract terms, so ask which charges are included.

Can a small business get a flexible contract?

Ofgem describes flexible contracts as suitable for large businesses that use a lot of energy, and says suppliers may decide which contracts to offer by business size or consumption. A small site may find fewer options, and suppliers are not obliged to offer a contract at all.

Is a longer contract cheaper than a shorter one?

The sources checked do not say so. The government buying agency says risk is usually lower over a longer buying time frame, which relates to stability from year to year, not to the level of the price. Compare actual offers on the same basis.

Does choosing a green tariff change the contract type?

No. A green option is a feature on top of a fixed-rate, variable or flexible contract. It changes the certificates the supplier retires for your volume, not how the energy price is set. Ask how the certificate cover is measured.

Request a renewable energy for businesses quote

By submitting you agree to our privacy policy. We never sell your details.

Related guides

Request a quote
Request a quote